Hot Shield Filters and Accessories

Call for Price

Hot Shield USA supplies through our dealers, a disposable N-95 style filter mask that can be inserted into the integral filter pocket of the HS-2 or used independently during mop-up (no heat hazard). The filter gives some additional structure to the HS-2 as well as assisting in vapor & particulate absorption/filtration.

Clear
SKU: HSFA01 Category:

Description

Manufacturer: Hot Shield
Filters for the HS-2 Face Mask

Model: DPM Filter

Hot Shield USA supplies through our dealers, a disposable N-95 style filter mask that can be inserted into the integral filter pocket of the HS-2 or used independently during mop-up (no heat hazard). The filter gives some additional structure to the HS-2 as well as assisting in vapor & particulate absorption/filtration.

Advantages: Ours is inexpensive & adequate for the intermittent use the HS-2 is desiged for. Also, we designed the HS-2 so that, in a pinch, you can install just about any brand of disposable filter with exhalation valve. Nearly all N-95 filters are made in the same shape. Just check to see that the valve is centered in the middle of the filter. another brand of filter. You are not committed to buying an expensive filter from only one company for the life of the mask.

Materials: Steam activated carbon sandwiched by cotton media filtration cloth with exhalation valve. Supplied with thin rubber straps and an aluminum pinch bar. Tear these off if you are going to install the filter in the HS-2. Leave the straps on your 2nd backup filter in your Web Case in case you want to use the filter by itself for mop-up.

Size: One size only – Medium

Limitations: This type of filter doesn’t block fire gases, like carbon monoxide, so don’t assume you can advance further into the fire. Use your head, training and common sense. Throw it away and replace with a new one when filter becomes difficult to breathe through or becomes damaged.

 

Carry Pouch for all Hot Shield Face Masks

Model: Web Case

The ergonomically correct carry pouch for your Hot Shield HS-2, UB-V2 or HS-5.

Features: Webbing straps on backside have snaps for easy removal from your pack harness straps or belt.

Advantages: Accommodates both your face mask and goggles, keeping both clean & ready for immediate use, similar in manner to a breathing apparatus face mask pouch that may be sewn to turnout/bunker coat at chest high level (see photos).

Size: 8.5″ wide x 10.5″ long. Oval shape, slightly narrower at the top ( 6.5″). About .5″ thick when empty and flattened, expands to over 5″.

Materials: 600 denier Nylon Cordura, with bi-directional zippers. Color: yellow

Warranty: One year materials and workmanship. Made in USA

Quick Connect Goggle Strap

Model: BLAZ

The BLAZER Quick Connect  Universal Replacement Goggle Strap adjusts both sides for a custom fit and plastic squeeze buckle (like you are accustomed to with backpacks, etc).

Universal design fits nearly any goggle in the world

  • Deploy your goggles in seconds without removing your helmet or stretching them around your helmet
  • Goggles can store clean in your pocket or pouch, reducing scratching to lenses
  • Goggles maintain pre-adjusted, personal fit.
  • Developed by firefighters
  • Made in USA

Additional information

Model

DPM Filter, Web Case, BLAZ